Specification Sheet:

BM1129

Matt White UD

FACE

A Matt white topcoated destructible film offering excellent destructibility and tamper evidence on a broad range of substances. Designed to accept conventional inks and thermal transfer printing with resin/wax ribbons. Typical applications include asset labelling, security seals and pharmaceutical box seal labels. This product is in compliance with European parliament directive 2011/65/EU.

Caliper: 50 micron ±5%
Basic Weight: 60 gsm ±5%

ADHESIVE

DA1 is a high performance adhesive offering very good adhesion to high and low surface energy surfaces.
Initial Tack: High
Final Adhesion: Very high
Min. App. Temp.: +4°C
Temp. Range: -40°C to +80°C
UV Resistance: Moderate

LINER

A blue super calendared glassine release liner. This offers great die cutting performance
Thickness: 68 micron ±5%
Basic Weight: 71 gsm ±5%
Shelf Life: 2 years when stored at 22* C / 50% RH
Additional info: Destructible films are fragile and care should be taken. We advise die tooling is specifically engineered for the material. Die tools should be correctly profiled, clean and sharp. A combination of large radius corners, 3mm minimum waste between labels and 10mm minimum edge gutters will aid waste removal when converted on a label press. Material should be loosely wound after cutting to prevent edge bleed.